Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Compare a 12V DC utility transfer pump, a Scandvik washdown spigot, and two stainless thru-hull fittings priced from $28.85 to $101.00 to choose the right marine pump, plumbing, and sanitation part.
From a $8.99 polypropylene 90° thru-hull to a $101 stainless washdown spigot, this guide compares four marine pump and plumbing parts by material, connection, and the job each is built for.
A close look at the Groco FBV-Series 3" NPS flange to NPTF bronze seacock, its fixed connection type, and what the listed price means for a replacement or new install.
Weighing the SEAFLO manual marine toilet head? We break down its ceramic bowl, wood seat, twist-n-lock control, and listed price to help you decide.
Choosing a thru-hull fitting for your boat's plumbing means weighing hose size, fitting angle, material, and listed price. These four options range from a 90-degree polypropylene fitting for 3/4-inch hose to a stainless steel barbed short straight with gasket for 1/2-inch hose.
Two 12V submersible 1100 GPH marine bilge pumps, one at $9.50 with a 1-1/8" hose hookup and one at $12.95 from The Perfect Part with a 3/4" hose, compared for fit, price, and use.
Two new 1100 GPH 12V submersible marine bilge pumps are ready to choose between: one fits a 1-1/8" hose and is listed at $10.00, the other fits a 3/4" hose and is listed at $12.95. Compare hose size, casing, and listed price to pick yours.
Two new 1100GPH 12V submersible bilge pumps share the same title. One is $10.99; the other is The Perfect Part at $12.95. The decision comes down to identification and price.
Compare two new 1100GPH 12V submersible marine bilge pump listings from The Perfect Part. Same specs, same price, and a clear answer on which to choose.
Looking for reliable thru-hull fittings for your boat's plumbing? This review covers the T-H Marine Plastic fittings at USD 17.69, highlighting their UV-stabilized build and suitability for marine use.
This VrotQyn 90 Degree 3/4 Inch Thru Hull Connector gives boat owners a black plastic fitting for plumbing and bilge installations at USD 14.07. Here is what stands out and what to weigh before buying.
Choosing a thru-hull fitting for marine plumbing comes down to angle, piece count, size, and listed price. This guide compares four connectors priced from $10.24 to $26.99.
Compare four marine thru-hull fittings for boat plumbing and sanitation, from a UV-stabilized T-H Marine fitting to white injection-molded 1/2-inch fittings and an adjustable connector.
Two new 1100 GPH 12V submersible bilge pump options for boats with a 3/4" hose are $2 apart in price. Both share the same core specs, so this pick helps you decide between the $10.99 pump and the $12.99 pump.
The 1100GPH 12V Electric Marine Submersible Bilge Sump Water Pump is a straightforward choice for boaters seeking a submersible 12V pump with a stated 1100 GPH rating and a 3/4-inch hose connection.
Choose between a 2000 GPH pump with an automatic switch, a nonautomatic 1500 GPH model, and two 1100 GPH options with different outlet and price priorities.
The 750GPH automatic submersible pump runs itself with a built-in float switch; the 1100GPH electric pump offers higher output and a larger hose at a lower price. Here's how to pick.
From a $11.12 push-fit connector to a $145.52 raw-water strainer, compare four marine plumbing and sanitation parts by price, purpose, and the job they actually do on a boat or RV.
Two 4700 GPH 12V bilge pumps look identical on paper, but the SEAFLO 01 Series costs $99.99 and names its certifications, while the High-Performance pump costs $170.99 and leads with quiet operation. Here's how to choose.
Compare a 240 GPH transfer pump, a 4700 GPH bilge pump, a seawater intake strainer, and a 3-inch bronze seacock across a $54.99 to $605.85 price range.
Compare the SEAFLO 4700 GPH and the 1100 GPH submersible bilge pump by price, flow rate, outlet size, and use case to find the right 12V pump for your boat.
Two 1100 GPH 12V submersible bilge pumps are only 49 cents apart. The lower-priced pump keeps the basics simple; the pricier one adds build details and dry-run tolerance.
The 316 Stainless Steel 1in Thru Hull Fitting promises a leak-free marine plumbing connection for water intakes, bilge pumps, and livewells. At $43.99, it brings rust-resistant construction and a compact design, but it's not meant for below-the-waterline use.
Compare the 1100GPH 12V Electric Marine Submersible Bilge Sump Water Pump and the 1100 GPH Submersible Bilge Pump 12V Marine Boat Electric Water Pump by price, specs, and use case to find the right 12V bilge pump for your boat.
This 90-degree thru-hull fitting in UV-resistant polypropylene is built for 3/4" hose, with a finished head and single-pass nut at $8.99. See whether it fits your marine pump and sanitation plumbing runs.
Choosing a 12V bilge pump for marine pumps plumbing sanitation? Compare four submersible options from $9.99 to $170.99, including a 4700 GPH high-output pump and compact 1100 GPH models.
A head-to-head look at a $17.69 UV-stabilized plastic thru-hull fitting and a $26.99 injection-molded white fitting for marine pumps plumbing sanitation.
A practical look at the Portable Toilet for Marine, RV, Camping and Boat (2.6 Gallon) from j-ySBQ53TC at USD 151.99, covering capacity, manual operation, and who it fits.
These two new 1100GPH 12V submersible bilge pump entries share the same boat-focused 3/4-inch hose format. The USD 12.95 entry is the straightforward lower-priced choice, while the USD 12.99 entry identifies China as its country of origin.
Need a 3/4-inch thru hull fitting for your boat's plumbing? This 2-pack of white marine thru hull connectors gives you a spare at a straightforward price. We break down what to consider.
Need a 12V bilge pump or hull drain? Compare three submersible pumps from 1100 to 2000 GPH plus a 2-piece 3/4-inch through-hull fitting across listed prices and key specs.
Compare the Alastin 3/4" and 1/2" 316 stainless steel thru-hull drain connectors for marine plumbing and sanitation. Both are New, China-made, and share a Hatch part type; your pick comes down to port size and the USD 8.16 listed price gap.
The 1100GPH 12V electric marine submersible bilge pump is a compact, ABS-bodied option for draining water from boats, aquariums, fishing boats, fountains, and runabouts. Priced at USD 12.99, it offers strong flow for small-to-mid-size applications. This guide walks through its listed features, installation convenience, and the trade-offs to weigh before choosing.
Considering a thru hull fitting for your boat's drainage line? This review breaks down the 1-1/4 inch opening fit, hand-tightened threaded nut, and PP plastic build of this USD 10.24 connector.
Compare four marine thru-hull fittings from a $10.24 connector to a $26.99 injection-molded model. See which straight or 90-degree option fits your boat's plumbing and budget.
Compare four thru-hull fittings from stainless steel 1/2-inch and 3/4-inch connectors to a hand-tightened plastic hose connector and a PVC 90-degree deck drain. See listed prices and use cases to decide which marine plumbing part matches your vessel.
Four 1100 GPH 12V submersible bilge pumps line up with different hose openings and prices. See which 3/4" or 1-1/8" option fits your boat and needs.
A compact 12V submersible bilge pump rated at 1100 GPH with a 1-1/8" hose fitting. See who it suits and what to check before you buy.
Alastin offers two 316 stainless steel boat thru-hull plumbing fittings: a 3/4-inch version at $34.13 and a 1/2-inch version at $25.97. The right choice depends on your drain line's diameter.
Finding more guides for you…