

Brass Street Elbow Set vs 90-Degree Thru-Hull Fitting: Which Marine Plumbing Part Fits?
A five-piece brass street elbow set and a 90-degree thru-hull fitting for a 3/4-inch hose go head-to-head for your marine plumbing job.
Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.


A five-piece brass street elbow set and a 90-degree thru-hull fitting for a 3/4-inch hose go head-to-head for your marine plumbing job.


SEAFLO's 4700 GPH bilge pump removes high volumes fast through a 2-inch outlet; TruePower's 240 GPH stainless steel utility pump transfers water under pressure at a lower price. Choose based on your water-moving job.


Compare the TruePower 12V DC utility transfer pump and the Jabsco Water Puppy flexible impeller pump for marine bilge and sump duty, then choose based on construction, price, and included accessories.


Choosing between the 1in thru hull fitting and the Scandvik washdown spigot comes down to the job you need done. We compare the 316 stainless steel thru hull fitting at $43.99 with the Scandvik 10187P at $101.00 to help you pick the right marine plumbing part.


Comparing the 750GPH Automatic All-in-One bilge pump and the 1100GPH submersible? See how flow, float-switch convenience, and price separate these two 12V marine pumps.


Choosing between a 1/2-inch 316 stainless steel straight thru-hull with custom gasket and a 3/4-inch 90-degree UV-resistant polypropylene fitting? We compare the $28.85 stainless and $8.99 plastic options to help you match the right angle, hose size, and material to your boat plumbing job.


Choosing between a $8.99 90-degree polypropylene thru hull and a $43.99 316 stainless 1-inch fitting? Compare fit, material, and intended use.


Need to move water on board? The TruePower 12V utility pump handles bilge and transfer tasks at $54.99, while the Scandvik stainless spigot delivers deck washdown at $101. See which fits your boating routine.


Need to move water out of the bilge or add a deck washdown station? This head-to-head compares the bilge pump with the Scandvik washdown spigot so you can pick the right marine plumbing fitting for your boat.


Compare the high-capacity SEAFLO 4700 GPH bilge pump with the compact, automatic 1100 GPH model with float switch to decide which 12V marine pump fits your boat and budget.


The 750 GPH automatic bilge pump is compact, light, and easy on your battery; the 4700 GPH marine pump moves water fast. Here's how to choose between them.


Compare a $9.99 submersible 1100 GPH pump with a $15.00 automatic 1100 GPH model that includes a float switch. See which fits your wiring setup and boating style.


The Jabsco Water Puppy is a bronze flexible impeller pump at $189.27, while the 1100GPH submersible is a compact ABS pump at $7.96. Choose the Jabsco for a flexible impeller pump or the 1100GPH for a fully submersible bilge pump.


Two 12V submersible bilge pumps at opposite ends of the price range: the 4700 GPH SEAFLO and a compact 1100 GPH pump. This head-to-head helps you match flow, plumbing, and budget to your boat.


Comparing the SEAFLO 01 Series 4700 GPH bilge pump with the 750 GPH automatic submersible pump to help you choose the right marine pump for your boat's size and pumping needs.


Compare the $48.95 750GPH automatic submersible bilge pump with the $9.50 1100GPH electric submersible pump. See which fits your boat's needs.


A 4700 GPH marine bilge pump for serious water removal versus a compact 1100 GPH option. Here's how to choose the right 12V submersible pump for your boat.


A $9.99 1100 GPH submersible bilge pump against a $54.99 240 GPH stainless utility transfer pump - which 12V marine pump fits your boat? Compare flow, pressure, construction, and real use cases.


Need a 12V marine pump? Compare the TruePower 240 GPH transfer pump with the 1100 GPH automatic bilge pump with float switch; see flow, build, and price.


Between a $28.85 thru-hull fitting for 1/2-inch hose and a $101 Scandvik washdown spigot, the choice comes down to what you're plumbing: a hose pass-through or a deck cleaning station.


Compare the Jabsco Water Puppy flexible impeller pump and the 1100 GPH submersible bilge pump for your boat's marine pump and plumbing sanitation needs, with a head-to-head look at price, pump design, and real-world tradeoffs.


Choosing between a complete 24V electric marine toilet with macerator and a manual replacement flush handle kit for an existing SEAFLO or JABSCO head? Here's how to match the right option to your boat and your budget.


Need to choose between a 12V utility pump and a stainless thru-hull for your boat's marine pumps, plumbing, and sanitation setup? The pump moves 240 GPH; the thru-hull creates a clean 1/2-inch hose connection. Decide based on the job your boat actually needs.


Choosing between a $9.99 1100 GPH submersible bilge pump and a $170.99 4700 GPH certified model comes down to boat size, mounting space, and how fast you need water out.


SEAFLO's manual twist-and-lock head and 24V electric twist-flush toilet are both compact ceramic-bowl options. The right pick depends on your boat's power supply and how much flush effort you want to provide.


Compare a stainless steel barbed thru-hull fitting at $28.85 with a marine drain plug set at $15.25. See which one fits a hose connection and which one suits a drain opening on a boat.


Choosing between an $8.99 submersible bilge pump and a $189.27 flexible impeller pump comes down to how much water you need to move, how you want to install it, and what your boat's plumbing can handle. Here's how they compare.


Need a marine pump or a thru-hull fitting? The 1100 GPH submersible bilge pump moves water out of a boat with a 12V motor and 29mm outlet, while the 90 degree thru-hull fitting gives you a UV-resistant polypropylene hose connection for 3/4-inch plumbing. Here's how to choose.


Choosing between the Marine Water Intake Strainer and the Jabsco Water Puppy comes down to what your boat needs: clean seawater flowing in or a flexible impeller pump moving bilge and sump water.


A 12V transfer pump moves bilge water; a 316 stainless thru hull fitting creates a leak-free pass-through. Our head-to-head shows which one belongs in your marine plumbing setup first.


Deciding between the $189 Jabsco Water Puppy bilge/sump pump and the $80 SEAFLO manual toilet flush handle kit? We compare power source, intended use, and price to help you choose.


Comparing a $145.52 seawater intake strainer with a $28.85 stainless steel thru hull fitting? This head-to-head breaks down when each marine plumbing part is the right choice.


Compact utility transfer pump or high-volume marine bilge pump? We compare the $54.99 240 GPH stainless steel model with the $170.99 4700 GPH high-performance pump to help you decide.


A $9.50 submersible 1100 GPH pump and a $189.27 Jabsco Water Puppy flexible impeller pump both move water out of a bilge, but they are not interchangeable. Here's how to pick based on your wiring, mounting, and pumping style.


Compare the affordable 90-degree thru-hull fitting for 3/4-inch hose with the Scandvik stainless steel deck washdown spigot to see which marine plumbing part matches your boat project.


Two 1100 GPH 12V submersible bilge pumps are within $1.00 of each other. We compare the ABS-bodied $8.99 model with the stainless-steel-shaft $9.99 model to help you choose.




Compare four marine plumbing fittings, from a $8.99 90-degree thru-hull to a $145.52 seawater intake strainer, and find the right match for your hose size.




Compare a 12V DC utility transfer pump, a Scandvik washdown spigot, and two stainless thru-hull fittings priced from $28.85 to $101.00 to choose the right marine pump, plumbing, and sanitation part.




From a $8.99 polypropylene 90° thru-hull to a $101 stainless washdown spigot, this guide compares four marine pump and plumbing parts by material, connection, and the job each is built for.




Choosing a thru-hull fitting for your boat's plumbing means weighing hose size, fitting angle, material, and listed price. These four options range from a 90-degree polypropylene fitting for 3/4-inch hose to a stainless steel barbed short straight with gasket for 1/2-inch hose.


Two 12V submersible 1100 GPH marine bilge pumps, one at $9.50 with a 1-1/8" hose hookup and one at $12.95 from The Perfect Part with a 3/4" hose, compared for fit, price, and use.


Two new 1100 GPH 12V submersible marine bilge pumps are ready to choose between: one fits a 1-1/8" hose and is listed at $10.00, the other fits a 3/4" hose and is listed at $12.95. Compare hose size, casing, and listed price to pick yours.


Two new 1100GPH 12V submersible bilge pumps share the same title. One is $10.99; the other is The Perfect Part at $12.95. The decision comes down to identification and price.


Compare two new 1100GPH 12V submersible marine bilge pump listings from The Perfect Part. Same specs, same price, and a clear answer on which to choose.




Choosing a thru-hull fitting for marine plumbing comes down to angle, piece count, size, and listed price. This guide compares four connectors priced from $10.24 to $26.99.




Compare four marine thru-hull fittings for boat plumbing and sanitation, from a UV-stabilized T-H Marine fitting to white injection-molded 1/2-inch fittings and an adjustable connector.


Two new 1100 GPH 12V submersible bilge pump options for boats with a 3/4" hose are $2 apart in price. Both share the same core specs, so this pick helps you decide between the $10.99 pump and the $12.99 pump.




Choose between a 2000 GPH pump with an automatic switch, a nonautomatic 1500 GPH model, and two 1100 GPH options with different outlet and price priorities.


The 750GPH automatic submersible pump runs itself with a built-in float switch; the 1100GPH electric pump offers higher output and a larger hose at a lower price. Here's how to pick.


Two 4700 GPH 12V bilge pumps look identical on paper, but the SEAFLO 01 Series costs $99.99 and names its certifications, while the High-Performance pump costs $170.99 and leads with quiet operation. Here's how to choose.
Finding more guides for you…