Quick Verdict
Choosing between these two marine replacement parts comes down to the job you're planning. If you're servicing a Westerbeke marine generator and want a single lot that covers the exhaust elbow, filters, belt, gaskets, and seals, the Westerbeke bundle is the comprehensive pick. If you need a 16-foot shift or throttle cable for a Johnson/Evinrude control setup, the Teleflex Type 400 is the focused, lower-priced choice. Match the part to the project and you'll avoid buying more than you need.
Comparison at a Glance
| Product | Price | What It Is | Best For |
|---|---|---|---|
| NEW Westerbeke Marine Generator Exhaust Elbow- Lot OEM Filters Belt Gasket Seals | USD 500.00 | 13-piece OEM service lot with exhaust elbow, oil filter, air filter, belt, gaskets, brass fittings, valve stem seals | Generator exhaust overhaul and preventive maintenance |
| Teleflex Type 400 16Ft Shift Control Cable Part# CC17016 Outboard Motor Parts | USD 69.99 | 16-foot throttle/shift cable for Johnson/Evinrude controls | Replacing a worn shift or throttle cable |
Where Each Product Wins
The Westerbeke lot wins when you want a complete generator service package. You get 13 OEM components including the exhaust riser/mixing elbow, 037533 exhaust elbow, oil filter, air filter element, drive belt, exhaust gasket, brass plug, brass elbow fitting, and valve stem seals. That's one purchase that can support both an exhaust overhaul and routine maintenance.
The Teleflex cable wins when you need a direct control cable replacement. It's a 16-foot Type 400 cable with the CC17016 part number, and it works as a shift cable or throttle cable. It also carries a lower price than the generator lot, so it's easier to budget for a single repair.
Product Notes
NEW Westerbeke Marine Generator Exhaust Elbow- Lot OEM Filters Belt Gasket Seals
At $500, this bundle is for the boat owner or mechanic planning a serious generator service session. You receive 13 genuine Westerbeke components: the exhaust riser/mixing elbow, 037533 exhaust elbow, 035828 oil filter, 24-28802 air filter element, 042790 drive belt, 036425 exhaust gasket, 036849 3/4 NPT brass plug, 036614 brass elbow fitting, and valve stem seals. That's enough to handle both a generator exhaust overhaul and routine filter/belt maintenance. The all-new condition and original factory packaging make it easy to inventory for future projects. The limitation is the scope: this lot centers on generator service, so it addresses a different maintenance need than a control cable replacement. If your immediate project is a shift or throttle cable, this bundle is more than you need.
Teleflex Type 400 16Ft Shift Control Cable Part# CC17016 Outboard Motor Parts
At $69.99, the Teleflex Type 400 is a focused replacement for a common control cable. The 16-foot length and CC17016 part number make it a straightforward pick when you need a shift or throttle cable for a Johnson/Evinrude control setup. It's sold as new old stock, so the packaging may show minor storage wear, but the cable itself is the functional part you're after. This is a smart choice if you're doing a single-cable repair and want to keep the project simple. The limitation is that it's one cable intended for control systems, not a broader service package. A generator overhaul would require additional parts beyond this cable.
Final Choice by Use Case
- If you're rebuilding or servicing a Westerbeke marine generator and want the exhaust elbow, filters, belt, gaskets, and seals covered in one lot, choose the Westerbeke bundle.
- If you need a replacement 16-foot shift or throttle cable for Johnson/Evinrude controls and want a single, lower-priced part, choose the Teleflex Type 400.
