Choosing marine replacement parts can be a matter of scope: do you need the full assembly, the motor inside it, the cable that runs to the controls, or just the strainer base that protects the bilge pump? The parts here sit at different repair levels and span a listed price range from $20 to $467.10. This guide compares them by what each part actually covers.
Quick take
- Power Trim Tilt Assembly 8M0055011 830250T3 Replacement for Mercury Mariner 35HP - the only complete trim/tilt assembly here, listed as new.
- Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123 - a 12V motor-level replacement with an interchange list.
- Teleflex Type 400 20Ft Shift Control Cable Part# CC17020 Outboard Motor Parts - a 20-foot control cable for outboard motor controls.
- Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts - a two-piece lot of red and blue strainer bases for round Rule pumps.
Listed price comparison
| Part | Listed price | Price bar | What you get |
|---|---|---|---|
| Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123 | USD 129.37 | 12V tilt/trim motor, MPN 430-22123, listed as new | |
| Power Trim Tilt Assembly 8M0055011 830250T3 Replacement for Mercury Mariner 35HP | USD 467.10 | Complete trim/tilt assembly listed as new, for Mercury Mariner outboards | |
| Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts | USD 20.00 | Two strainer bases for round Rule pumps | |
| Teleflex Type 400 20Ft Shift Control Cable Part# CC17020 Outboard Motor Parts | USD 69.99 | 20-foot Teleflex Type 400 control cable |
Decision matrix
| If you need... | Best match | Why |
|---|---|---|
| Complete trim/tilt unit | Power Trim Tilt Assembly 8M0055011 830250T3 Replacement for Mercury Mariner 35HP | Assembly-level part for Mercury Mariner 35-60 HP outboards |
| Motor-only repair | Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123 | 12V unit with interchange numbers to check |
| 20-foot shift cable | Teleflex Type 400 20Ft Shift Control Cable Part# CC17020 Outboard Motor Parts | Control cable replacement for outboard motors |
| Bilge pump strainer bases | Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts | Two-piece lot of red and blue bases for round Rule pumps |
Product notes
Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123
This motor-level option suits a repair that stops at the tilt/trim motor rather than the entire assembly. It is listed as new, rated for 12V, and carries part numbers 430-22123 and TRM0095 alongside an interchange list that begins with 38100-92J02 and 38100-92J03. The Taiwan source is stated in the listing.
Before choosing, match your existing part number against that interchange list. The California Proposition 65 notice is also part of the listing, so make sure that warning is acceptable for your situation.
Power Trim Tilt Assembly 8M0055011 830250T3 Replacement for Mercury Mariner 35HP
The complete power trim/tilt assembly is the broadest replacement option in this group. It is listed as new, carries 830250T3 and 8M0055011 part numbers, and is described for Mercury Mariner 35HP, 40HP, 50HP, and 60HP outboards. The package is substantial at 11.6 lb and roughly 15 x 7.7 x 5.5 inches.
Because this is an assembly-level part, the important step is to match your outboard's original part number to the references shown before ordering. If your repair only involves the trim motor, this unit would be more than you need.
Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts
The two-piece Rule strainer-base lot covers the 275 and 278 replacement numbers and gives you red and blue bases for round Rule bilge pumps. That makes it a convenient spare-parts option if you already run Rule pumps and want bases on hand.
The listing makes clear that the pumps themselves are not included, and the bases show normal scratches and scuffs from previous use and storage. Review the photos and mounting points to confirm they fit your particular pump.
Teleflex Type 400 20Ft Shift Control Cable Part# CC17020 Outboard Motor Parts
This Teleflex cable is the right part to consider when the failure is in the control cable rather than the trim system. It is a 20-foot Type 400 cable, part number CC17020, intended for outboard motor controls and carrying a Johnson Evinrude control-cable reference.
The caveat is in the condition: it is listed as new old stock and not in the original box. Check that the cable type and length match your control layout, since a 20-foot cable is a specific fit.
Final recommendation by use case
- Full Mercury/Mariner trim/tilt repair: choose the Power Trim Tilt Assembly 8M0055011 830250T3 Replacement for Mercury Mariner 35HP.
- Motor-only trim repair: choose the Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123.
- Shift control cable replacement: choose the Teleflex Type 400 20Ft Shift Control Cable Part# CC17020 Outboard Motor Parts.
- Bilge pump strainer bases: choose the Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts.
