Before you shop for marine replacement parts, decide which system needs the part. The four listings here do not overlap much: one is a tilt/trim motor for an outboard, one is a pair of Rule bilge pump strainer bases, one is a Tonka Marine Transport truck-and-motor accessory set, and one is a Pro Boat RC tug replacement. Listed prices run from $20.00 to $129.37, and the practical spread between the lowest and highest listings is $109.37. That spread is not a contest between similar parts; it is a reminder that replacement part means very different things for an outboard, a bilge pump, a toy transport set, and a radio-controlled boat.
Quick take
Let the model number lead. If the motor you are tracking uses the 430-22123 interchange number or an API Marine / J & N reference, the Total Power Parts tilt/trim motor is the functional replacement to look at. If you already own a round Rule bilge pump, the two-base lot gives you fresh strainer bases at the low end of the price bar. If you need to complete a Tonka Marine Transport set, the four-rowboat package with two outboard motors is the closest match. If your hull is the Pro Boat Retriever System Tug 30, the PRB281112 part lines up with that model by name.
Listed price comparison
Here is how the four listings compare by listed price.
| Product | Listed price | Price bar |
|---|---|---|
| Tonka Marine Transport Truck & Motor Replacement Parts Set TKP-104-4 | USD 125.00 | [#########-] |
| Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123; 430-22123 | USD 129.37 | [##########] |
| Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts | USD 20.00 | [#---------] |
| Pro Boat Retriever System Tug 30 PRB281112 Replacement Boat Parts | USD 36.99 | [##--------] |
Decision matrix
- Choose the tilt/trim motor when the replacement need is an outboard tilt/trim unit with the 430-22123 or API Marine / J & N reference.
- Choose the Rule lot when the project is a bilge pump strainer base and you are comfortable with a parts-only two-base lot.
- Choose the Tonka set when the missing pieces are rowboats, decks, seats, windshields, and outboard motors for a Tonka Marine Transport truck-and-trailer package.
- Choose the Pro Boat part when the hull is a Pro Boat Retriever System Tug 30 and you need the PRB281112 replacement.
Product notes
Tonka Marine Transport Truck & Motor Replacement Parts Set TKP-104-4
This new Tonka set contains four injection-molded plastic rowboats, two white and two red, plus decks, seats, windshields, and a pair of outboard motors. The listing presents it as the complete accessory group for the Tonka Marine Transport truck and trailer. The description says the pieces may need some adjustment, fitting, or slight modification for use on a particular item, so it is not a universal mechanical drop-in. It is the only listing here aimed at a Tonka transport package, and the price sits near the top of the group. The trade-off is that this is an accessory set, not a running mechanical part. It is a reasonable pick if the missing rowboats, motors, or deck pieces belong to that truck-and-trailer setup.
Tilt Trim Motor Replacement for API Marine: PT653NM J & N 430-22123; 430-22123
The Total Power Parts unit is a new 12-volt tilt/trim motor carrying model number TRM0095 and manufacturer part number 430-22123. The title links it to API Marine PT653NM and J & N 430-22123, and the interchange numbers shown include references such as 38100-92J02, 38100-92J03, and 5033838. The listing includes a California Proposition 65 warning, so that notice is worth reading before you order. This is the highest-priced listing in the group, and it stands apart as the outboard tilt/trim motor in this comparison. The limitation is part-number matching: this listing earns its place only when the original motor reference is 430-22123, API Marine PT653NM, or one of the shown interchange numbers.
Rule Bilge Pump Strainer Base Lot 275 278 Red Blue Marine Replacement Parts
This lot gives you two genuine Rule strainer bases, one called out as a 278 and one as a 275, with red and blue color references in the title. The description says the bases are for round Rule pumps and help prevent debris from entering the pump, and it makes clear this is a parts-only listing with no bilge pumps included. The price lands at the bottom of the group, which makes it the least expensive way in this comparison to replace a strainer base for a Rule pump. The limitation is the opposite side of that simplicity: you are getting bases only, not the pump body or anything else in the bilge pump system.
Pro Boat Retriever System Tug 30 PRB281112 Replacement Boat Parts
The Pro Boat part is listed as new and labeled for the Retriever System Tug 30, with model and MPN PRB281112 and UPC 605482673140. The compatible brand is Pro Boat, and the age level is listed as 17 years and up. The listing sits between the low and high ends of the price bar, but the more useful reference is the PRB281112 part number rather than the price. This is the only item here aimed at an RC hull, and it is the natural match when the boat in front of you is specifically a Pro Boat Retriever System Tug 30. Its limitation is scope: the stated compatibility points to that Pro Boat model, not to a universal replacement for other brand hulls or sizes.
Final recommendation by use case
For an outboard boat, start with the tilt/trim motor carrying the 430-22123 reference. For a Rule bilge pump, the two-base lot is the lowest-priced, parts-only path to fresh strainer bases. For a Tonka Marine Transport project, the TKP-104-4 set is the full four-rowboat-plus-motors package. For the Pro Boat Retriever System Tug 30, the PRB281112 replacement is the one part that matches the model by name.
