Every boat that goes out after dark faces the same choice: spend money on something that makes other boats see you, or spend it on something that protects the circuits running everything else. The QLOOASEA Boat Navigation Lights LED and the Blue Sea 8374 3-Position Vertical WR Circuit Breaker Panel answer that question in very different ways. One is a small running light; the other is a panel for breakers. Neither replaces the other, but most boaters will need one of them soon.
Quick Verdict
The QLOOASEA LED navigation lights are the direct answer for side visibility at night. At $14.99, they are an easy add when visible running lights are the missing piece. The Blue Sea 8374 panel is the larger structural upgrade. At $130.00, it provides a vertical place for circuit breakers in a boat, RV, or yacht. It is a panel project rather than a plug-and-play accessory.
Comparison Table
| Item | Listed price | Main job | Limitation to know |
| Boat Navigation Lights LED | $14.99 | Red and green bow light with 3NM visibility and 225° coverage | Designed for 12-24V DC systems |
| Blue Sea 8374 3-Position Vertical WR Circuit Breaker Panel | $130.00 | Water-resistant panel for circuit protection | Panel only; breakers are sold separately |
Where the QLOOASEA Nav Light Wins
- It is a one-piece bow light that fits the front of a small boat, fishing boat, bass boat, jon boat, or pontoon.
- The 28-LED design draws only 2.3W, so it adds running lights without a heavy power draw.
- The PC lens and ABS housing target saltwater and abrasion resistance, and the IP67 rating gives it strong waterproofing.
Where the Blue Sea 8374 Wins
- It gives you one clean spot for three circuit breakers rather than breakers mounted in scattered spots.
- It is made in the USA and built for boats, yachts, RVs, and marine vessels.
- It is specifically described as a marine electrical distribution panel.
Product Notes
Boat Navigation Lights LED, Red and Green Marine Navigation Lights for Boats LED
This QLOOASEA set combines 16 red and 12 green LEDs in one bi-colored housing. It runs on 12-24V DC, draws 2.3W, and provides the 3NM visibility and 225-degree radiation angle that meets USCG requirements. The PC lens with ABS housing is meant to reduce rusting, saltwater damage, and abrasion, and the IP67 rating helps it stand up to weather. With 20AWG wire leads and a universal fit, it is a straightforward front-mount choice for boats like pontoons, jon boats, and bass boats. Choose it when nighttime side visibility is the missing piece. The trade-off: it is built for 12-24V DC electrical systems, so it is not a component for AC power work.
Blue Sea 8374 3-Position Vertical WR Circuit Breaker Panel Marine Boat RV Yacht
This Blue Sea Systems panel is a water-resistant, vertical-mount unit for marine DC electrical distribution. It has three breaker positions on a vertical mount, which makes it suited for helm stations or control panels where space is tight. The right time for this panel is when you want a single organized point for circuit protection. The catch: the panel is sold without breakers, so you will be adding breakers separately before it can protect anything. A California Prop 65 warning on the item notes exposure to lead and other materials.
Final Choice by Use Case
If the only real gap on your boat is visibility after dark, the QLOOASEA Boat Navigation Lights LED is the easy call. It addresses the side lights that help other boats see you, and it is the smaller, simpler piece of the marine electrical and lighting puzzle.
If you are working on DC circuit protection and want a clean breaker location, the Blue Sea 8374 panel is the right direction. It is the larger commitment, but it gives you a real distribution panel to grow into.
If both jobs are on your list, start with whatever is missing the most: visible running lights or protected circuits.
